how do you draw a tree

Download Article

Download Article

Knowing how to describe a tree comes in handy when you're sketching a landscape or woods scene. Fortunately, drawing a tree is uncomplicated once yous know where to start, whether you desire to brand a uncomplicated tree, a leafless wintertime tree, or a tall evergreen. Past starting with an outline and then calculation the parts of the tree every bit you lot get, you tin can depict a realistic-looking tree in no time!

1. 

   1

   Describe a long horizontal line and the trunk of the tree first. The horizontal line will exist the footing line, or the basis that your tree is growing out of. To draw the trunk, sketch 2 vertical lines coming up out of the ground line.^[1]

   • The meridian and width of the torso is upward to y'all, but don't brand it also tall or broad or it may not expect realistic.

2. 

   2

   Add some thin branches coming out of the top of the trunk. Spread the branches out and have them going in different directions then it looks like branches on a real tree. Brand sure the branches are thinner than the trunk of the tree.^[2]

   • Don't worry about making the branches perfect. Some of them will become covered up later when yous add together the leaves to your drawing.

   Advertisement

3. 

   3

   Describe a large circle effectually the branches. This will be the outline for the crown (leafy peak) of your tree. The top of the circumvolve should extend past the tips of the branches, and the bottom of the circle should line up with the top of the torso.^[3]

   • This circle is just an outline, so information technology doesn't need to be perfect!

4. 

   iv

   Use wavy lines to add leaves to the crown of the tree. Start by post-obit along the circle you lot drew and making random, wavy lines. And then, add some wavy lines inside of the circle to requite the tree dimension.^[4]

   • Attempt to describe the lines in random places inside of the circle and so the leaves on the tree wait more realistic.

5. 

   5

   Shade in the tree to finish your drawing. Get-go by shading in the trunk so that one side is darker than the other. Then, shade in the branches and the leaves, making the lesser of crown darker than the top. Yous can as well shade around the ground line to make it await like your tree is casting a shadow.^[v]

   • Once yous cease shading your drawing, you're finished!

   Advertizement

1. 

   1

   Draw a trunk with 3 big circles on peak of it. To make the trunk, draw ii vertical lines next to each other that taper in toward the top. When you draw the 3 circles, put 2 on the bottom i on the acme.^{[half dozen]}

   • Try to make the circles effectually the same size, merely they don't need to exist perfect. You'll only be using them as a guide when you add the branches to the tree afterward on.

2. 

   two

   Add together 2-3 big branches coming up off the trunk. These will be the large, supporting branches of the tree. To draw a branch, describe two parallel lines coming up off the top of the torso and accept them taper in at the end and so they meet at a point. Make sure the branches are inside of the circles you drew before.^[7]

   • Have the branches become in dissimilar directions so your tree looks more realistic.

3. 

   3

   Draw modest branches coming off of the large branches. To make these branches, you tin can just draw sparse lines coming off of the large branches of the tree. Extend these branches then they hitting the edges of the circles you drew on meridian the trunk. The branches at the bottom of the tree should extend farther than the branches at the peak.^[8]

   • Draw wavy, irregular lines to make the branches since perfectly straight lines won't look realistic.

4. 

   4

   Erase the 3 circles you lot drew earlier. At present that yous've added the branches, you don't need the circles as a guide anymore.^[9]

   • Be conscientious erasing so you don't accidentally erase the branches you drew!

5. 

   5

   Cease your cartoon past shading in the trunk and branches. Shade the tree then that i side of the trunk and branches is lighter than the other. That fashion it will await similar the sun is shining on the tree.^[10]

   • You tin too add the basis that the tree is growing out of by shading in the expanse underneath the tree.

   Advertisement

1. 

   ane

   Draw a large, alpine triangle. This triangle will exist the outline for your pine tree. The verbal dimensions don't affair, just make certain information technology'south not too short or it won't look like a existent pine tree.^[11]

   • If you want your tree to be symmetrical, draw the triangle using a ruler.

2. 

   ii

   Make a line through the middle of the triangle and add a pocket-sized stalk. The line should run from the bottom of the triangle to the signal at the top. To brand the stem, draw a small, 4-sided shape at the lesser of the triangle that tapers in at the pinnacle.^[12]

   • You lot'll be erasing the line subsequently, then don't worry about making it perfectly direct!

3. 

   three

   Add curved spikes on both sides of the line to make the branches. Describe the spikes so they start at the line in the center of the triangle and extend just by the side of the triangle. Brand sure the spikes are curved upward since that's how the branches on pine trees look.^[13]

   • Attempt to draw an equal number of curved spikes on both sides of the triangle.

4. 

   4

   Draw wavy lines over the spikes to make the branches more realistic. Follow along the outline of the spikes and add the wavy lines every bit you become. Make the waves minor and so they look like individual pino needles on the branches of the tree.^[14]

   • The wavy lines don't need to be the same on each branch. Cartoon them randomly volition make your tree expect real!

5. 

   5

   Erase all of the unnecessary lines to cease your drawing. Once you've finished the branches, you tin can go back in and erase the original triangle you drew. You can too erase the line down the middle of the tree.^[15]

   • Be conscientious when yous're erasing the lines so you don't accidentally erase the branches on the tree.

   Ad

Ask a Question

200 characters left

Include your e-mail accost to get a bulletin when this question is answered.

Submit

Advertisement

Thanks for submitting a tip for review!

Things Yous'll Need

• Paper
• Pencil
• Eraser
• Sharpener

About This Article

Commodity Summary Ten

To draw a tree, start by drawing a long horizontal line to brand the ground and so two vertical lines coming up off of it for the trunk. So, sketch some thin branches extending off of the trunk so they're all going in different directions. Next, draw a large circle around the branches and go over it with wavy lines to brand the leaves. Also, draw wavy lines within of the circle to give the tree dimension. Finally, shade in the tree and so ane side of the body is darker than the other. To larn how to draw a pine tree or a winter tree, scroll down!

Did this summary help you?

Thank you to all authors for creating a page that has been read 50,665 times.

Did this article aid you?

Source: https://www.wikihow.com/Draw-a-Tree

Posted by: dewsfrept1991.blogspot.com

Share this post